Table of Contents
Advertisement
Diverse 4016 Micro ~ 3rd Edition ~ 12th Octoberr 2001 ~ 3667
3
Connect the charger
Situate your charger close enough to
a mains power socket so that the cable
will reach. The charger does not need
to be situated near the base unit.
Plug the power supply cable into the
power socket on the back of the
charger and rotate it as shown, then
feed the cable through the slot on the
right. Plug the power supply unit into
the wall socket and switch on.
2
4
Registering and charging
the handset
The display is protected by a plastic film.
Remove it from the display.
1
Menu
WARNING
Under no circumstances should
non-rechargeable batteries be used.
Only use the approved batteries.
Using unapproved batteries will
invalidate your guarantee and
may damage the telephone.
Insert the battery pack
Insert the battery pack supplied, as
indicated below, and slide the battery
compartment cover shut.
The battery cover may be found in the
packaging with the battery.
13
Advertisement
Table of Contents
