AT&T IP Flexible Reach Service
Nortel BCM200/400 (Release 4.0.2.03a) H.323 Configuration Guide
4 Configuration Guide
This configuration guide specifies the Nortel BCM200/400 screens that must be
configured and updated to support the AT&T IP Flexible Reach service.
4.1 Nortel BCM Version and Feature Requirements
The Nortel Networks BCM must be running release 4.0.2.03a. You can check the
version of BCM by viewing the following screen.
Figure 2: BCM200/400 software version
Ensure that the System Identification page specifies Version 4.0.2.03a. This is
the supported release that is required for AT&T IP Flexible Reach service.
© 2008 AT&T Knowledge Ventures. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T
Knowledge Ventures. Subsidiaries and affiliates of AT&T Inc. provide products and services under the AT&T brand.
Issue 1.9
Page 10 of 36