Other Esi-Link Features - ESI 600 User Manual

User's Guide

Other Esi-Link features

Using Location Dex to access a remote location's Station Dex
. . . on a 24-Key Feature Phone
1. Press ESI-DEX until LOCATION DEX appears in the display.
2. Use the scroll keys (
dial keys to "jump" to the first location name that begins with one of the letters on that dial key.
3. Press ESI-DEX again. The phone will display the remote location's Station Dex, where you can
select a station or department, just as you would using the Station Dex for your location.
. . . on a 48-Key Feature Phone
1. Press ESI-DEX; then select LOC in the display.
2. Use the scroll keys (
dial keys to "jump" to the first location name that begins with one of the letters on that dial key.
3. Press ESI-DEX again; then select STA (for Station Dex) in the display.
4. Use the scroll keys (
5. Select DIAL to ring the Esi-Link extension.
Tip: You can also use Location Dex to assign programmable feature keys as station keys and Location Keys.
If necessary, see "Programmable feature keys," pp. C.2–C.3.
Examples:
Assigning a Location Key
1. Hold down the desired programmable feature key for at least two seconds to enter
programming mode.
2. Press ESI-DEX until LOCATION DEX appears in the display.
3. Press a scroll key (
4. Press the feature key again.
Assigning a station key
1. Hold down the desired programmable feature key for at least two seconds to enter
programming mode.
2. Press ESI-DEX until LOCATION DEX appears in the display.
3. Press a scroll key (
4. Press ESI-DEX; STATION DEX will appear in the display.
5. Press ESI-DEX again.
6. Press a scroll key (
7. Press the feature key again.
or ) to select the remote location name and number. You can also use the
or ) to select the remote location name and number. You can also use the
or ) to select the desired extension.
or ) until the location is displayed.
or ) until the location is displayed.
or ) until the remote location extension appears.
Using Esi-Link
H.7