Introduction; Figure 1-1. Eaton 9E Ups (80-200Kva) - Eaton 9E Installation And Operation Manual

Chapter 1

Introduction

The Eaton 9E 80-200kVA uninterruptible power supply (UPS) is a true online, continuous-duty, transformer-free,
double-conversion, solid-state, three-phase system, providing conditioned and uninterruptible AC power to
Chapter 1 Introduction
protect the customer's load from power failures.
The Eaton 9E 80-200 kVA online power protection system is used to prevent loss of valuable electronic
The Eaton
information, minimise equipment downtime, and minimise the adverse effect on production equipment due to
transformerless, double-conversion, solid-state, three-phase system, providing conditioned and uninterruptible
unexpected power problems.
AC power to protect the customer's load from power failures.
The Eaton 9E 80-200 kVA UPS continually monitors incoming electrical power and removes the surges, spikes,
The Eaton 9E 40–60 kVA online power protection system is used to prevent loss of valuable electronic
sags, and other irregularities that are inherent in commercial utility power. Working with a building's electrical information, minimize equipment downtime, and minimize the adverse effect on production equipment due to
unexpected power problems.
system, the UPS system supplies clean, consistent power that sensitive electronic equipment requires for
reliable operation. During brownouts, blackouts, and other power interruptions, batteries provide emergency
The Eaton 9E 40–60 kVA UPS continually monitors incoming electrical power and removes the surges, spikes,
power to safeguard operation.
sags, and other irregularities that are inherent in commercial utility power. Working with a building's electrical
system, the UPS system supplies clean, consistent power that sensitive electronic equipment requires for
The UPS is housed in a single free-standing cabinet, with safety shields behind the door for hazardous voltage
reliable operation. During brownouts, blackouts, and other power interruptions, batteries provide emergency
protection. Figure 1-1 shows the Eaton 9E 80-200 kVA UPS.
power to safeguard operation.
The UPS is housed in a single free-standing cabinet, with safety shields behind the door for hazardous voltage
protection. Figure 1-1 shows the Eaton 9E 40–60 kVA UPS.
Figure 1-1. Eaton 9E UPS (40–60 kVA)
® 9E 40–60 kVA uninterruptible power supply (UPS) is a true online, continuous-duty,
NOTE 1 Startup may be performed by the customer's qualified electrical contractor for single (not
parallel) UPS installations without any accessory cabinets.
Startup may be performed by the customer's battery qualified electrical contractor
NOTE 1
for single (not parallel) UPS installations without any accessory cabinets such as an Startup and operational checks for parallel systems or installations with accessory
NOTE 2
External Battery Cabinet.
cabinets must be performed by an authorised Eaton Customer Service Engineer, or the
warranty terms may become void. This service is offered as part of the sales contract for
NOTE 2 Startup and operational checks for parallel systems or installations with accessory
the UPS. Contact an Eaton service representative in advance (usually a two-week notice
cabinets must be performed by an authorized Eaton Customer Service Engineer, or
is required) to reserve a preferred startup date.
the warranty terms specified on page W-1 become void. This service is offered as
part of the sales contract for the UPS. Contact an Eaton service representative in
advance (usually a two-week notice is required) to reserve a preferred startup date.

Figure 1-1. Eaton 9E UPS (80-200kVA)

Eaton 9E UPS (40–60 kVA, 208/220V) Installation and Operation Manual P-164000058—Rev 2
Eaton 9E UPS (80-200 kVA, 380/400/415V) Installation and Operation Manual
1-1
1-1