Using the Pen
Pen
Hold the pen as you would a pencil.
When the pen tip is within proximity (5 mm or 0.2 in) of the active area, the tablet reports:
- The x, y coordinates of the pen tip.
- The pressure applied to the pen tip.
When pressure is applied to the pen tip, the tip switch is turned on and the pen simulates a mouse button
click.
Using a Pen
Pointing and Selecting
Move the pen above the DTF-510U Interactive Pen Display screen to position the screen cursor.
The cursor instantly jumps to the new location (absolute positioning). Press the pen tip on the Interactive Pen
Display screen to make a selection.
NOTE: If the screen cursor is not aligned with the pen tip, you will need to calibrate the Interactive
Pen Display.
Clicking
Tap the Interactive Pen Display screen once with the pen tip, or touch the pen to the display screen with
enough pressure to generate a mouse click.
14
DTE-510UEN.ind
Pen Tip
DTF-510
14
03.4.9, 6:33 PM