Button Functions - Wacom DTZ-2100D User Manual

The Cintiq21UX Display
Open the menu screen and
3
select the Main control → the
IMAGE → the Clock options.
(See pages 15 -17)
Adjust the frequency so that
4
the adjustment pattern of verti-
cal stripes displays evenly.
Next, select Phase. (See page
5
16)
Adjust the tracking so that the
6
adjustment pattern of vertical
stripes appears clearly.
With pushing the Enter button several times, return to the main menu.
7
With pushing a Enter button, close the Menu screen.
8
Press the Esc or space key to return to the screen.
9
For Windows 2000, the phase and clock may be calibrated after the Exit Windows
screen is displayed. If the frequency needs to be calibrated, light and dark vertical
stripes will appear in the dark areas of the screen. If the tracking needs to be
calibrated, light and shade will appear horizontally in the dark areas of the screen (for
1200 x 1600-bit resolution).
This method is recommended in situations where the tablet driver has not been installed.

Button Functions

RGB/DVI Switch
Button, Button
Auto-Ajust Button
/Selection Button
Menu Button/Enter Button
The buttons have the following functions.
Name of button
Menu button
Enter button
Auto-Adjust button
Selection button
∧ and ∨ buttons
14
Functoin
Please refer to P.14-16 regarding how to use these buttons.
(to be used with the menu screen), to display and close the menu screen.
(to be used with the menu screen), to establish settings that have been selected.
to initiate operation of the screen's automatic adjustment function. See page 16.
(to be used with the menu screen), choose desired settings withthis button.
(to be used with the menu screen), to set numerical values.
Adjustment pattern for phase and clock
Shaft Bearing