Using Fastbuild™ Configuration Utility - SOYO SY-K7V DRAGON Plus User Manual

Using FastBuild™ Configuration Utility
The FastBuild TM Configuration Utility offers several menu choices to create and
manage the drive array on the FastTrak100-Lite. For purposes of this manual, it is
assumed you have already created an array in the previous chapter and now wish to
make a change to the array or view other options.
VIEWING FASTTRAK100-LITE BIOS SCREEN
When you boot your system using the FastTrak100-Lite on-board RAID with drives
installed, the FastTrak BIOS will detect the drives attached and show the following
screen.
FastTrak100-Lite (tm) BIOS Version 1.xx (Build xx)
(c) 1995-2000 Promise Technology, Inc. All Rights Reserved.
Scanning IDE drives . . . . .
If an array exists already, the BIOS will display the following screen showing the
card's BIOS version and status of the array.
FastTrak100-Lite (tm) BIOS Version 1.xx (Build xxxx)
(c) 1995-2000 Promise Technology, Inc. All Rights Reserved.
ID MODE
1 * 2+0 Stripe 16126M
Press <Ctrl-F> to enter FastBuild (tm) Utility....
The array status consists of three possible conditions: Functional, Critical, Offline.
Functional - The array is operational.
SIZE TRACK-MAPPING
611/128/32
118
STATUS
Functional