Table of Contents
Advertisement
Hardware Installation
I can not get my board to run properly.
Please make sure you have the latest bios and driver from the SOYO web
site at:
http://www.soyo.com
I can not use my SCSI card on PCI slot#2, what's the problem?
Move the SCSI card to another PCI slot, PCI slot#2 and the on-board
RAID share the same INT, or disable the on-board RAID.
RAID Issues
Can I use my CD-ROM on IDE 3 & 4?
Yes, you can use the CD-ROM on IDE 3 & 4. First, you need to short pin
2-3 of the RAID_IDE jumper.
Can I use IDE 3 & 4 to boot from CD-ROM?
No.
I can not use RAID function on IDE 3_4.
Please check RAID_IDE jumper setting on page 43.
2-3.9 Power Off
There are two possible ways to turn off the system:
1.
Use the Shutdown command in the Start Menu of Windows 95/98
to turn off your computer.
2.
Press the mechanical power-button and hold down for over 4
seconds, to shutdown the computer. If you press the power-button for
less than 4 seconds, then your system will enter into Suspend Mode.
You are now ready to configure your system with the BIOS setup program.
Go to Chapter 3: BIOS SETUP
SY-K7V DRAGON Plus!
51
Advertisement
Table of Contents
