Table of Contents
Advertisement
Compatibility
Complies with PCI v2.1 Local Bus
standard
Compliant with PCI IDE Bus Master
standard. PCI IDE Bus Master support
for Windows 98/95, Windows NT 3.5x, 4.0
Compatible with Ultra ATA/100, Ultra
ATA/66, Ultra ATA/33, EIDE
Features LBA and Extended Interrupt13
drive translation in controller onboard
BIOS
This section is designed to get you started for installation of your
FastTrak100-Lite.
WARNING: Before installing the driver into an existing system,
backup any necessary data. Failure to follow this accepted PC
practice could result in data loss.
INSTALLING THE HARD DRIVES
Hard drives must be Ultra ATA/100, Ultra ATA/66, Ultra ATA/33, EIDE and/or Fast
ATA-2 compatible to operate with FastTrak100-Lite RAID. For optimal
performance, install all identical drives of the same model and capacity. The
drives' matched performance allows the array to function better as a single drive.
1.
Promise recommends using identical drive as part of a FastTrak100-Lite array.
If striping for performance, use two new drives. If mirroring for protection,
you can use two new drives OR use an existing drive and a new drive (the new
drive must be the same size or larger than the existing drive).
Features
Getting Started
WARNING: If you wish to include your current bootable drive
using the Windows NT 4.x or Windows 2000 operating system
as part of a bootable Mirrored (RAID 1) array on your
FastTrak100-Lite, do NOT connect the hard drive to the
FastTrak100-Lite controller yet. You MUST install the Windows
NT4 or 2000 driver software first to this drive while it is still
attached to your regular IDE port.
Provides highest level of hardware
compatibility.
Provides 32-bit I/O, IDE Bus Master, and
Ultra ATA performance for optimal system
performance.
Works with newest and current IDE drive
specifications.
Breaks capacity barriers for support of
drives greater than 8.4GB in capacity.
Offers flexible storage options for space
demanding applications.
112
Benefits
Advertisement
Table of Contents
