Atx Power - SOYO SY-K7V DRAGON Plus User Manual

Hardware Installation
2-3.3.6 AGP Pro Slot
This motherboard supports AGP 2x/4x/Pro VGA CARD.
Note: DO NOT remove the safety tab underneath it if you will be using an
AGP card without a retention notch. Removing may cause the card to shift
and may cause damage to your card, slot, and motherboard. Remove
ONLY when you will be using an AGP Pro card. You can use a pen tip to
remove the tab from the bay.
2-3.3.7 ATX Power Supply
Plug the connector from the power directly into the 20-pin male ATX PW
connector on the Motherboard, as shown in the following figure.
SDRAM
SDRAM
Warning: Follow these precautions to preserve your
Motherboard from any remnant currents when connecting to
ATX power supply:
Turn off the power supply and unplug the power cord of the
ATX power supply before connecting to ATX PW connector.
□
42
SY-K7V DRAGON Plus!

ATX Power