Table of Contents
Advertisement
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Channel 1 (IDE1)
Channel 2 (IDE2)
[←, →, Space] Change Option
Halting FastTrak BIOS On Bootup Errors
The [Adapter Configuration – Options] section allows you to enable or disable
FastTrak100-Lite to Halt operation at the BIOS startup screen should an error be
detected. This is the only option that can be changed on this screen.
Installing Drivers
This section details the FastTrak100-Lite driver installation when used with various
operating systems. The software includes the driver necessary to identify
FastTrak100-Lite to the operating system.
•
For Windows 2000, see below.
•
For Windows 95/98, see page 136.
•
For Windows 4.x, see page 139
WINDOWS 2000
Installing Driver During New Windows 2000 Installation
1a. Floppy Install: Boot the computer with the Windows 2000 installation
diskettes.
1b.
Floppyless Install: Boot from floppy and type "WINNT". After files have
been copied, the system will reboot. On the reboot, press <F6> after
[ Adapter Configuration - Options ]
Halt On Error:
[ System Resources Configuration ]
Interrupt : A I/O Port : FFF0
Interrupt : A I/O Port : FFA8
[ Keys Available ]
133
Enable
[ESC] Exit
Advertisement
Table of Contents
