SOYO SY-K7V DRAGON Plus User Manual page 127

FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Array No RAID Mode
Status
Array 1
Functional
Array 2
Array 3
Array 4
Note: * — Bootable Array
[↑] Up [↓] Down
1. To manually create an array from the Define Array Menu, use the arrow keys
to highlight the array number you wish to define, and press [Enter] to select.
2. The Define Array Menu will next appear that allows drive assignments to the
disk array (see next page).
Selecting Array Type
1. Under the Definition section of this menu, highlight the Array # for which you
want to assign a RAID level.
2. Use the [Space] key to cycle through three array types: Performance (RAID 0
Striping), Security (RAID 1 Mirroring).
[Define Array Menu]
Total Drv
Stripe 2
—— ——
—— ——
—— ——
[ Keys Available ]
[ESC] Exit [Enter] Select
Capacity(MB)
16126
——
——
——
[Space] Change Boot Drive
123
——
——
——