Table of Contents
Advertisement
Chapter 3 • Using the System 4 xi Front Panel
Horizontal Shift Control
Contrast Control
Color Control
Tint Control
Detail Control
3-11
This is for line doubled/line quadrupled signals only.
Press H S
to bring up this menu. The current Horizontal Shift setting will be
HIFT
displayed. Use
or
to change the setting, while observing the projector/
monitor screen. (Range: -62 to +62).
Press
to save the new setting.
Press H S
again to exit and return to the default screen.
HIFT
To exit without saving, press H S
of the other procedures above.
Press C
to display this menu. The current Contrast setting will be displayed.
ONT
Use
or
to change the setting, while observing the projector/monitor screen.
(Range: -62 to +62).
Press
to save the new setting.
Press C
again to exit and go to the default screen.
ONT
Press C
to display this menu. The current Color level will be displayed.
OLOR
Use
or
to change the setting, while observing the projector/monitor screen.
(Range: -62 to +62).
Press
to save the new setting.
Press C
again to exit and go to the default screen.
OLOR
Press T
to display this menu. The current Tint (Hue) level will be displayed.
INT
Use
or
to change the setting, while observing the projector/monitor screen.
(Range: -62 to +62).
Press
to save the new setting.
Press T
again to exit and go to the default screen.
INT
This control is only on the System 4LDxi and 4LQxi
Press D
to display this menu. The current Detail (Sharpness) setting will be
ETAIL
displayed. Use
or
to change the setting, while observing the projector/
monitor screen. (Range: 1 to 4).
Press
to save the new setting.
Press D
again to exit and go to the default screen.
ETAIL
again (without pressing
HIFT
Extron • System 4 xi Switcher Series • User's Manual
), or use one
Advertisement
Table of Contents
