Table of Contents
Advertisement
System 4xi with One System 8/10 P
Go to page 4-6 to set up the
System 8/10 P
After making all the cable
connections, go to page 4-7
to configure the master/
slave as a system.
INPUT 1
H/HV
V
R/C
G/Y
SVGA Compatible
Figure 4-3. System 4 xi Master with a System 10 Plus Slave Switcher
_______ Regardless of how the slave switcher input connectors are marked, they must
Extron • System 4 xi Switcher Series • User's Manual
Switcher
LUS
The System 8/10 P
Audio output of the System 8/10 P
System 4xi. Use the figure below as an example.
The System 4xi will control the System 8/10 P
secondary RS-232 port, by way of a System 4xi Slave Adapter described on
page 4-2.
switches.
LUS
Projector
Comm Adapter
Rear Panel
INPUT 2
INPUT 3
H/HV
V
H/HV
AUDIO
AUDIO
B
R/C
G/Y
B
R/C
Laserdisc Player
with S-video Outputs
and Stereo Audio
System 10 Plus
Laptop Computer
Computer
conform to the inputs of the System 4 xi . They are: R/C, G/Y/Video, B, H/HV & V.
Note that composite video uses the G/Y connector.
Chapter 4 • Connecting Multiple Switchers
must be configured as a Slave. Connect the RGBHV and
LUS
switcher to the last (4th) input of the
LUS
Projector
Projector Communication
Extension Cable
INPUT 4
PJ COMM
V
H/HV
V
AUDIO
AUDIO
G/Y
B
R/C
G/Y
B
Audio*
*
Extron recommends that audio
connections between switchers be wired
unbalanced. If balanced connections are
required, insert a -6 dB pad in-line to
maintain 0 dB system audio gain.
VCR
Switcher through the
LUS
2-Channel
Stereo Audio
BNC Cable
OUTPUT
H/HV
V
AUDIO
RS-232
R/C
G/Y
B
System 4
Slave Adapter
(26-386-01)
Control System
4-4
Advertisement
Table of Contents
