Chapter 7, Screen and Field Descriptions
Parameters of the DCCH CALL CONFIGURE II Screen
Parameters of the DCCH CALL CONFIGURE II Screen
Figure 71
Calling Name
Calling Num
226
S:\HP83206A\USRGUIDE\MANUAL\ref.fm
The DCCH CALL CONFIGURE II screen is used to define information sent to
the mobile for testing message waiting (MWI) and caller ID functions.
The DCCH CALL CONFIGURE II Screen
Settings: 25 characters
Units: None
This is the name of the station that is calling the mobile.
Settings: Integer. Ten characters maximum.
Units: None.
This is the number of the station that is calling the mobile.
Calconf2.tif