Release
Settings: This is an immediate action field. Selecting it starts the action.
Units: None.
Release is a command. This command instructs the Test Set to release the call in
progress.
Release
Command
Figure 69
The Release Command Display (CALL CONTROL Screen)
SAT
Settings: 5970, 6000, 6030
Units: Hz.
This is the Supervisory Audio Tone. Used with AVC only.
SID
Settings: 1 through 32767
Units: None, Decimal or hexadecimal values.
This is the System Identification of the system which the Test Set is emulating.
Chapter 7, Screen and Field Descriptions
Parameters of the CALL CONTROL Screen
cm-meas.tif
217