Slot
Settings: 1 through 6
Units: None, Integer values.
Slot is for the DTC only. The timeslot which the mobile is directed to use.
During half-rate transmission, slots are paired in the following manner: 1&4,
2&5, 3&6.
Traffic Chan
Settings: 1 through 799, 990 through 1023
Units: None, Integer values.
This is the channel number of the traffic channel.
Note that if you change the
MEASUREMENT screen, the
changes corresponding to the new channel number. However, if you change the
RF Gen Frequency
not change.
Chapter 7, Screen and Field Descriptions
Parameters of the DIGITAL MEASUREMENT Screen
Traffic Channel number
RF Gen Frequency
field in the Duplex screen, the Traffic Channel number does
field in the DIGITAL
field in the Duplex screen
231