Chapter 3, Processing Calls
Configure the Test Set to Emulate a Base Station
66
S:\HP83206A\USRGUIDE\MANUAL\cpmeas.fm
Define the settings for the traffic channel that you want your mobile to be assigned to
when establishing a call:
•
Choose DTC to set up a Digital Traffic channel.
•
Type: DTC
•
Band: Select PCS or Cellular.
•
Chan: Enter your desired channel number
•
Slot: Enter your desired slot number.
•
Pwr Lvl: Enter your desired power level.
•
DVCC: Enter your desired DVCC.
•
Choose AVC to set up a Analog Voice channel.
•
Type: AVC
•
Chan: Enter your desired channel number.
•
Pwr Lvl: Enter your desired power level.
•
SAT: Choose your desired SAT frequency.
•
Voc: Select the type of vocoder used by the mobile.
•
VSELP is most often used for non-PCS compatible mobiles.
•
ACELP is most often used for PCS-compatible mobiles.
C. Make the following settings on the CAll CONFIGURE II screen:
•
Select CALL CFG2 from the To Screen menu.
•
Choose MS Capab to indicate the type of mobile you are testing.
•
Select Cellular if the mobile is not PCS-compatible.
•
Select US PCS if your mobile is PCS-compatible.
•
If a PCS Interface is used: Select Temperature to compensate for temperature
changes in the PCS Interface.
•
Press the PREV key to return the CALL CONTROL screen (or select CALL CNTL
from the To Screen menu).