Initialize Call Processing With Authentication - HP 83206A User Manual

Chapter 3, Processing Calls
Authentication

Initialize Call Processing with Authentication

72
S:\HP83206A\USRGUIDE\MANUAL\cpmeas.fm
There are two methods to initialize Call Processing with authentication.
• Initializing Call Processing with Authentication through registration with the Test Set.
• Initializing Call Processing with Authentication without registration with the Test Set.
Initialize Call Processing with Authentication through Registration
1. On the CALL CONTROL screen, set the System Type to DCCH and verify that the
Active annunciator is lit.
2. Connect the mobile station to the Test Set as shown in
3. Turn on the mobile station.
4. Verify that the mobile station is camped on the control channel.
5. Select the Register field. The Register annunciator lights while the registration is in
process. If the mobile station responds properly on the reverse control channel, the
mobile station's phone number, ESN, SCM, protocol version, and model are displayed
in the upper right-hand portion of the CALL CONTROL screen. The information in the
MS Id field is updated. The Active annunciator lights when the registration has
successfully completed.
6. Select AUTHEN on the To Screen field. The AUTHENTICATION screen is
displayed.
7. Select the A_KEY field and enter the first 20 digits of a valid A_KEY in decimal
format.
8. Position the cursor on the Off/On field and select On.
9. Select CALL CNTL from the To Screen menu. The CALL CONTROL screen is
displayed.
10. Select SSD Upd in the CC Order field. The Access annunciator light lights while the
SSD Update order is in progress. If the mobile station responds properly on the reverse
control-channel, "SSD Update Order Successful" is displayed in the upper right-hand
portion of the CALL CONTROL screen. The test set and the mobile station now share
common secret data and further call processing functions with authentication can be
tested. If the order failed, then "SSD Update Order Failed" appears on the upper right-
hand portion of the CALL CONTROL screen.
Figure 5 on page 38