CALL CONTROL
The CALL CONTROL screen is the primary screen of the DCCH Call Processing
Screen
Subsystem. It controls call setup and maintenance functions for base station
emulation. From this screen, you can set basic parameters of the channel, such as
Phone Number, Control Channel Number, Amplitude, Voice Channel, and Power
Level.
The CALL CONTROL screen transmits on DCCH, ACC, DTC, or AVC.
The CALL CONTROL screen can display either data or measurements. Select
data
of the screen.
NOTE:
The measurements of the CALL CONTROL screen are only displayed while the Test
System is in Connect state; a call must be in process. For measuring parameters without a
call in process, see
These
annunciators
show the status
of the Test
Set.
These are the
controls for
base station
emulation.
Figure 12
The CALL CONTROL Screen for TIA/EIA-136
or
by toggling the
measurements
"DIGITAL MEASUREMENT Screen" on page
Chapter 2, Product Description
The DCCH Call Processing Screens
field in the upper-left corner
Display
55.
This area
displays data
and measurements
when active.
callcont.tif
53