Chapter 7, Screen and Field Descriptions
Parameters of the CALL CONTROL Screen
Pwr Lvl
CHANGING POWER
LEVELS
Register
Register
Annunciator
Register
Command
Figure 68
216
S:\HP83206A\USRGUIDE\MANUAL\ref.fm
Settings: 0 through 10 for DTC, 0 through 7 for AVC. Note that Power Level 0 is
the maximum power.
Units: None, Integer values.
This is the power level that the mobile is to use.
This parameter will change the power of the mobile when a voice or traffic channel assign-
ment is made. This includes whenever a handoff occurs. To send an order that will change
the mobile's power, use the Order field in the lower left-hand corner of the screen.
Settings: This is an immediate action field. Selecting it starts the action.
Units: None.
Register is both an annunciator and a command. This command instructs the
mobile to register with the Test Set (emulated base station). The annunciator
indicates the Test Set is sending the Register message.
The Register Command and Annunciator Display (CALL CONTROL Screen)