About Call Processing Tasks And Measurements - HP 83206A User Manual

Chapter 3, Processing Calls

About Call Processing Tasks and Measurements

About Call Processing Tasks and Measurements
62
S:\HP83206A\USRGUIDE\MANUAL\cpmeas.fm
The Call Processing subsystem of the HP 8920 and Cellular Adapter can be set up
to emulate a TIA/EIA-136 standard base station.
Primary call processing tasks such as registrations, pages, handoffs, and releases
can be made with just one screen: the CALL CONTROL screen. Some of the
major call processing parameters can also be set on this screen. See
of the CALL CONTROL Screen" on page 208
More parameters and features, such as Short Message Services, can be controlled
with the CALL CONFIGURE screen. See
CONFIGURE Screen" on page 220
Message Waiting Indicators and Caller ID features are controlled on the CALL
CONFIGURE II screen. See
Screen" on page 226
Measurements in the Digital test mode can be made in the DIG MEAS screen. See
"Digital Measurement Screen Tests" on page
Measurements on the Analog Voice channel can be made in the Connect state or
the ANLG MEAS screen. See
Authentication is controlled on the AUTHENTICATION screen. See
of the DTC AUTHENTICATION Screen" on page 236
"Parameters of the DCCH CALL
"Parameters of the DCCH CALL CONFIGURE II
118.
"Analog Parameters" on page 113
"Parameters
"Parameters