Updating Windows Nt 4.0; Using Advanced Configuration Parameters - HP D5970A - NetServer - LCII Installation And Configuration Manual

Updating Windows NT 4.0

1. Start Windows NT.
2. Click the Start button on the Windows NT task bar, and then point to Set-
tings.
3. Click the Control Panel.
4. Double-click the SCSI Adapters icon.
5. Click the Drivers tab, and then click the Add button.
6. In the Install Driver window, click the Have Disk button.
7. Insert the HP Ultra3 Family Manager Set disk for Windows NT into drive A.
8. From the Copy Manufacturer's File From text box, type a:\nt4, and click
OK.
9. In the Install Driver window, Click OK.
10. Click the New button when asked if you want to use the currently installed
driver(s) or install new one(s).
11. Type a:\nt4 again, and click Continue. The driver is now installed.
12. You must restart your computer for the changes to take effect. Click Yes to
restart your computer. Click No to return to the SCSI Adapters window.

Using Advanced Configuration Parameters

Advanced users may use software parameters to alter the configuration of the
Windows NT device drivers supplied by HP. All Windows NT configuration
information is stored in a data structure called the Registry. You can edit this
information through a tool called the Registry Editor.
CAUTION Do not edit your registry unless it is absolutely necessary.
If there is an error in your registry, your computer may
become nonfunctional.
25