Table of Contents
Advertisement
Making changes to
In the Connect state, when
the Measurements
displays the EVM1 measurements. When making measurements on a digital
display
traffic channel, there are four default selections for the EVM1 measurements:
•
•
•
•
Default measurement
selections
Figure 31
Default Measurement Selections
The
measurements. If it has already been modified, the last modified display will
appear instead of the default. The displays for Adjacent Channel Power, Average
Power, and MAHO are fixed.
CALL PROCESSING
If you select any of the call processing functions (Active, Register, Page,
DURING MEAS MODE
Handoff, Release) while in the Meas mode, the display will automatically change
back to the Data mode.
Meas
Frequency Error
TX Power
EVM
Peak EVM
display for EVM 1 and EVM 10 can be configured to display different
Meas
Chapter 4, Making Measurements
How to Read Data and Make Measurements
is selected for the first time, the default screen
Cm-meas.tif
107
Advertisement
Table of Contents
