Access; Active - HP 83206A User Manual

Access

Settings: On or Off
Units: None.
Access is an annunciator. It indicates that the Test Set and the mobile are in
communication, usually while setting up a call.
Access
Annunciator
Figure 62 The Access Annunciator Display (CALL CONTROL Screen)

Active

Settings: This is an immediate action field. Selecting it starts the action, an
annunciator indicates On or Off status.
Units: None.
Active is both an annunciator and a command. This command instructs the Test
Set to emulate a base station. The annunciator indicates that the Test Set is ready
to perform base station functions.
Annunciator
Command
Figure 63 The Active Command and Annunciator Display (CALL CONTROL Screen)
Chapter 7, Screen and Field Descriptions
Parameters of the CALL CONTROL Screen
209