Measuring Absolute Tx Power On An Avc - HP 83206A User Manual

Chapter 4, Making Measurements
TX Power
Measuring
Absolute TX Power
on an AVC
Read
Absolute
TX Power
Figure 54
140
S:\HP83206A\USRGUIDE\MANUAL\meas.fm
To measure absolute TX Power when a mobile is in the Connect state, use the
following measurement procedure. To measure absolute TX Power when the
mobile is in the Test mode, select
display the ANALOG MEAS screen.
TX Power measurement procedure
1. Establish a call between the mobile and the Test System on an analog voice channel.
When established, the Connect indicator on the CALL CONTROL screen is 'lit' and
the Traffic Chan Assignment - Type: indicates AVC. See
page 93
.
2. Select Meas from the Data/Meas field.
3. Absolute TX Power is displayed, along with other relevant analog measurements.
Measuring TX Power on an Analog Voice Channel (AVC)
(from the
ANLG MEAS
To go to the
ANALOG MEAS
screen.
list) to
To Screen
"Registration" on
Confirms
AVC
Abstxpwr.tif