Using Presets - Extron electronics MAV 44 Series User Manual

Operation, cont'd
4.
Press the button to deselect
video and select audio.
The video LED is off
when video is deselected.
The audio LED lights
when audio is selected.
Figure 3-26 — Deselect video to view audio ties only
5.

Using presets

The current configuration (configuration 0) can be saved as a preset in any one of
16 preset memory addresses. Each switch has as many presets available from the
front panel as it has input and output buttons. For example, MAV 44 has 8 presets
(4 input buttons and 4 output buttons) available from the front panel and the
MAV 88 has 16 (8 input buttons and 8 output buttons). Preset numbers above those
available from the front panel are available under RS-232 or IR control only. See
chapter 4, Remote Operation.
3-16 MAV 44 / 48 / 84 / 88 Matrix Switchers • Operation
Press and release the I/O button (figure 3-26).
I/O
1
VID
+dB
AUD -dB
The Output 3 LED lights to indicate that output 3 is selected and it is receiving audio.
The source is indicated by the Input LED.
The Output 8 LED also lights to indicate that output 8 is receiving audio from the
indicated input.
INPUTS
4
The Input 5 LED lights to indicate that this input's audio is tied
to output 3 (and the other lit outputs).
Allow the 5-second input and output button timeout to deselect the output.
• Only the audio and video ties are stored and recalled; audio gain settings
are not saved, and they do not change when a preset is recalled.
• Presets cannot be viewed from the front panel unless recalled as the
current configuration. Presets can be viewed using Extron's Windows-
based control program. See Chapter 4, "Remote Operation", for more
details.
• The current configuration and all presets are stored in non-volatile
memory. When power is removed and restored, the current configuration
is still active and all presets are retained.
• When a preset is recalled, it replaces the current configuration, which is
lost unless it is also stored as a preset. The recalled preset overwrites all of
the current configuration ties in favor of the preset configuration ties.
OUTPUTS
5
2 3 4
5
6
7
6 8