Matrix Switchers Control Program; Installing The Software - Extron electronics MAV 44 Series User Manual

Remote Operation, cont'd

Matrix Switchers Control Program

The Windows
communicates with the switcher via the rear panel Remote RS-232 port provides an
easy way to set up ties and sets of ties. The program is compatible with
Windows 2000 and Windows XP.

Installing the software

The program is contained on the Extron Software Products CD-ROM, disk B.
Install the software as follows:
1.
Figure 4-6 — Software CD window
2.
3.
Figure 4-7 — Software installation
4-12 MAV 44 / 48 / 84 / 88 Matrix Switchers • Remote Operation
®
-based Extron Matrix Switchers Control Program, which
For full functionality, install both of the following programs:
• The Matrix Switchers Control Program
• The Firmware Loader
Insert the CD-ROM into the drive. The installation program should start
automatically. If it does not self-start, run Launch.exe from the CD.
The Extron software CD window appears (figure 4-6).
Click the Software tab (figure 4-6).
Scroll to the desired program and click Install (figure 4-7).