Stp Port Settings - EverFocus ES0812-31 User Manual

changing states (i.e., discarding to learning to forwarding). Number between 4 –
30 (default is 15)
Click Update to have the configuration take effect.
The below table shows the Bridge Status and Root Switch's Status. The Bridge
Status shows the STP configuration of the switch. The Root Status shows the
Root Switch's Information of the STP domain.

4.8.2 STP Port Settings

The STP Port Setting page allows
you to change the port priority
and its path cost.
After STP/RSTP is enabled, the
system automatically assigns the
port priority and path cost to the
prot. Normally, it is necessary to
change the parameters, however,
you may need to control the root
switch or block port in some
condition.
This page allows you to change the STP port setting. Select the port number, type
the value of the Priority and Root Path Cost.
Click "Submit" to apply the settings.
39
PoE Switch