Poe - EverFocus ES0812-31 User Manual

The broadcast packet is only checked at the selected port and the number of
broadcast packets is counted in every time unit. The one time unit indicates the
number of broadcast packet which is allowed to enter each port in one time unit.
The one time unit is 50us for Gigabit speed, 500 us for 100Mbps speed and 5000us
for 10Mbps speed. The excessive broadcast packet will be discarded. For those
broadcast packets incoming from the un-selected port, the switch treats it as the
normal traffic.
 Threshold: Type in the threshold in the range between 1 and 63 to limit the
maximum byte counts, which a port can send or receive in a period of time.
 Enable Port: Having ticked the boxes, the port will stop transmitting or receiving
data when their sending byte counts or receiving byte counts reach the defined
threshold.
Example to change one time unit to pps:
The port 1 is 100M port. The one time of it is 500us, it indicates there are
2,000packets can be sent within one second. While type 10 to port 1, that means
10x2000 packets can be sent in one second.
Click Update to have the configuration take effect.

4.3.5 PoE

User could know per PoE port out power status in this page and also enable or
disable per port.
Figure 3-5
22
PoE Switch