Multi To 1 Setting - EverFocus ES0812-31 User Manual

Source Port allows you to define the PVID.
After configured and selected. Then click on Add to create the table and related
port mapping. The new group with its setting will be displayed at the bottom of
the screen.

4.4.3 Multi to 1 Setting

Multi to 1 VLAN is used in CPE side of Ethernet-to-the-Home and is exclusive to VLAN
setting on VLAN Member Setting. When VLAN member Setting is updated, multi to 1
setting will be void and vice versa. The disable port means the port which will be
excluded in this setting. All ports excluded in this setting are treated as the same
VLAN group. In a normal Tag Based VLAN network you will not need this
configuration option.
Figure 4-5
29
PoE Switch