Broadcast Storm Control - EverFocus ES0812-31 User Manual

 Port No.: Select the port number you want to configure.
 Tx Rate: Type the Tx Rate value. The value is range from 0-255.
 Rx Rate: Type the Rx Rate value. The value is range from 0-255.
 Speed Base: Low: step by 32Kbps. High: step by 256Kbps for Fast Ethernet
Ports. 2048Kbps for Gigabit Ports.
Click Update to have the configuration take effect.
Example: Type 5 for both Tx and Rx Rate and select the High as speed base for port 1
and port 10. The actual rate for port 1 (Fast Ethernet) is "1280", for port 9 (Gigabit
Port) is 10240. You could see the table is updated as below.

4.3.4 Broadcast Storm Control

The switch implements a broadcast storm control mechanism. Tick the check
boxes to have them beginning to drop incoming broadcast packets if the received
broadcast packet counts reach the threshold defined. Each port's broadcast storm
protection function can be enabled individually by ticking the check boxes.
Figure 3-3
Figure 3-4
21
PoE Switch