Security; Mac Address Binding - EverFocus ES0812-31 User Manual

4.7 Security

The Security feature allows you to enable Port Security (MAC Address Binding) and
TCP_UDP Filter feature.

4.7.1 MAC Address Binding

This is also known as Port Security funciton of some other switch. The feature
allows you to bind 1-3 MAC address to one physical port. After the port and MAC
address is binded, only the allowed MAC Address can access the switch.
The upper table allows you to bind the MAC address to one specific port.
 MAC Address: Type the target MAC address you want to bind for the specific
port. User can assign up to 3 MAC addresses to the port.
 Select Port: Select the port number and click "Read" button. If you don't enter
any MAC Address before, the address is blank. If you have entered any MAC
address, the field will display the MAC addresses your previously entered.
 Binding: Enable or Disable. Select Enable to enable the MAC Address Binding
feature.
 Update: After selected the port, enabled Binding and entered MAC Address,
click "Update" to update and save the settings.
The lower table shows the binding status of the port.
Figure 7-1
35
PoE Switch