VLAN Mode : Displays VLAN mode : port based/Tag based VLAN. Here you can
also switch back to Port Based VLAN Mode
Tag Mode:
AddTag means the outgoing packet of the selected port will be inserted a
802.1Q tag. Use this setting for your Up- and Downlink Ports in your VLAN
Tagged Network.
don't care: Don't care means the outgoing packet of the selected port
keep the original packet received at the source port. This is the default
setting when starting VLAN configuration. You should change to either Add
or Remove Tag.
Remove Tag: Remove tag means the 802.1Q tag of the outgoing packet of
the selected port will not be sent. Use this setting for your Network
Connections to PCs. Only packets of the VLAN Group the Port is member of
will be sent.
4.4.2 VLAN Member
The ports need to be made member of your VLAN groups. This is for Tag Based
and Port Based VLAN Mode. The screen here looks different whether you run Tag
Based or Port Based Mode.
VLAN Member in Port Based Mode
Figure 4-2
25
PoE Switch