Table of Contents
Advertisement
2.2 LED Indicators
The LED Indicators present real-time information of systematic operation status.
The following table provides description of LED status and their meaning.
LED
Power
10/100M
Link/ ACT
PoE
1000M
(Port 9-10)
2.3 Hardware Installation
Set the switch on a large flat space with a power socket close by. The flat space
should be clean, smooth, level and sturdy. Make sure there is enough clearance
around the switch to allow attachment of cables, power cord and allow air
circulation. The last, use twisted pair cable to connect this switch to your PC then
user could start to operate the switch.
AC Power Input
Connect the attached power cord to the AC power input connector, the available
AC power input is range from 100-264VAC.
Ethernet cable Request
The wiring cable types are as below.
10 Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm (Max. 100m)
100 Base-TX: 2-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (Max. 100m)
1000 Base-T: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (Max. 100m)
PoE: To delivery power without problem, the Cat 5/5e and Cat 6 cable is
Color/Status
Description
Amber On
Green On
Green Blinking
Amber On
Off
Green On
Green Blinking
Power on
Link Up
Data activating
Port is linked to Power Device
No Power Device is connected
Link Up
Data activating
6
PoE Switch
Advertisement
Table of Contents
