Table of Contents
Advertisement
4.2.1.4
Firmware Update
Before the firmware update procedure is executed, you should enter the
password twice and then press Update button.
The popup warning window appears for making sure you want to proceed the
firmware upgrading process.
All functions will be detected except the firmware update itself.
If want proceed, click "Yes" to continue. If not, please click "Cancel".
The smart switch will erase the flash memory. There is a self-protection
mechanism in the Boot Loader, so the Boot Loader will keep intact. Even though
the power is turned off or the cable link fails during the firmware update
procedure, the Boot loader will restore the code to firmware update page.
Figure 2-5
Notice that the code of flash memory will be erased.
Figure 2-6
16
PoE Switch
Advertisement
Table of Contents
