Port Mirroring; Bandwidth Control - EverFocus ES0812-31 User Manual

4.3.2 Port Mirroring

The Port mirroring is a method for monitoring traffic in switched networks. That
Traffic through ports can be monitored by any of the ports means traffic goes in or
out monitored (source) ports will be duplicated into mirroring (destination) port.
 Destination (mirroring) port for monitoring Rx only, Tx only or both RX and TX
traffic which come from the source port. Users can connect the mirroring port
to LAN analyzer or Netxray.
 Monitored Packets: Pull down the selection menu to choose what type of
packet is to be monitored. Rx indicates the Received Packets, Tx indicates the
Transmitted Packets. Tx & Rx indicates Both Transmit and Received.
 Source Port: The ports that the user wants to monitor. All monitored port
traffic will be copied to mirroring (destination) port. Users can select multiple
source ports by ticking the check boxes beneath the port number label to be
monitored.
And then, click Update to have the configuration take effect.

4.3.3 Bandwidth Control

This page allows the setting of the bandwidth for each port. The TX rate and Rx
rate can be filled with the number ranging from 1 to 255. This number should be
multiplied by the selected bandwidth resolution to get the actual bandwidth.
Figure 3-2
20
PoE Switch