Tcp/Udp Filter - EverFocus ES0812-31 User Manual

This table shows the binding status of the port 1 is enabled.

4.7.2 TCP/UDP Filter

This page allows user to configure the TCP/DUP limit.
 Function Enable: To Enable or Disable the function.
Port Filtering Rule: The outgoing packet with selected protocol will be either

forwarded or dropped at secure WAN port as the figure shown below.
"negative" means the selected protocol will be dropped and other

protocols will be forwarded.
"positive" means the selected protocol will be forwarded and other

protocol will be dropped.
 Protocol: Select the pre-defined known protocol or User_Define Protocol
number.
 Secure WAN Port: The port number of the Secured WAN Port. The secured
WAN port is the Egress Port. The configured limit packet will be dropped.
Figure 7-2
Figure 7-3
36
PoE Switch