Table of Contents
Related Manuals for EverFocus ES1625-31
Summary of Contents for EverFocus ES1625-31
- Page 1 ES1625-31 16-port 10/100M PoE + 2 Gigabit Copper/SFP Combo Rackmount Web Smart PoE Switch User’s Manual Copyright © EverFocus Electronics Corp, Release Date: September, 2013 Notice: This content is subject to be changed without notice.
- Page 2 All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of the Everfocus Electronics Corporation. Release Date: September, 2013 QuickTime is a registered trademark of the Apple Computer, Inc.
-
Page 3: Safety Precautions
Safety Precautions FCC Warning This Equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. -
Page 4: Table Of Contents
TABLE OF CONTENTS Introduction ........................1 1.1 Product Overview ......................1 1.2 Key Features ........................1 1.2.1 Web Management Features ................1 1.2.2 Specifications ...................... 2 1.2.3 Mechanical ......................2 1.2.4 Performance ......................3 1.3 Package .......................... 3 Hardware Description ....................4 2.1 Physical Dimensions/ Weight .................. - Page 5 7.1 Port Counter......................... 20 7.2 QoS Setting ........................21 7.3 Priority Mode ....................... 21 7.4 Port, 802.1p, IP/DS based .................... 22 Security ........................23 8.1 MAC Address Binding ....................23 8.2 TCP/UDP Filter ......................23 Spanning Tree ......................24 9.1 STP Bridge Settings ...................... 24 9.2 STP Port Settings ......................
-
Page 6: Introduction
ES1625-31 Chapter 1. Introduction 1.1 Product Overview This switch provides 16 10/100Mbps RJ-45 ports and can support 2 Combo Gigabit RJ-45/SFP to uplink. This web-smart switch includes auto-MDI/MDIX crossover detection function. 16 of those ports are all built with PoE functionality, providing the ultimate choice in network flexibility. With this added PoE feature, this switch is an ideal solution for building wireless, IP surveillance, and VoIP networks. -
Page 7: Specifications
ES1625-31 Class of Service Configuration TCP/UDP Port-based • Security Setting MAC address filtering TCP/UDP Port filtering • STP/RSTP • Spanning Tree Protocol • Backup Recovery Configuration 1.2.2 Specifications • Standard IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3x Full-duplex and Flow Control IEEE 802.af PoE... -
Page 8: Performance
ES1625-31 45 × 440 × 330 mm (H × W ×D) / 4.4kg 1.2.4 Performance • MAC Address: 4K • Buffer Memory: 2.75Mb • Transmission Method: Store and Forward 1.3 Package Before you start to install this switch, please verify your package that contains the following items: 1. -
Page 9: Hardware Description
ES1625-31 Chapter 2. Hardware Description This section mainly describes the hardware of the 8 PoE port Ethernet Combo Web-Smart Switch and gives a physical and functional overview on the certain switch. 2.1 Physical Dimensions/ Weight 45 × 440 × 330 mm (H × W ×D) / 4.4kg 2.2 Front Panel... -
Page 10: Rear Panel
ES1625-31 Link 1000Mbps 1000M 2 (17~18) Link 10/100Mbps Link 18 (1~18) Link/ ACT Flashing Data activating 18 (1~18) Port is linked to Power 16 (1~16) Device No Power Device is 16 (1~16) connected 2.4 Rear Panel The 3-pronged power plug is placed at the rear panel of the switch right side shown as below. -
Page 11: User Log In
ES1625-31 Chapter 3. User Log In This part instructs user how to set up and manage the switch through the web user interface. Please follow the description to understand the procedure. At the first, open the web browser, and go to 192.168.2.1 site then the user will see the login screen. - Page 12 ES1625-31 Main Page...
-
Page 13: Administrator
ES1625-31 Chapter 4. Administrator 4.1 Authentication Configuration This page shows authentication configuration information. User can set new Username and Password in this page. 4.2 System IP Configuration This page shows system configuration including the current IP address and sub-net mask and... -
Page 14: System Status
ES1625-31 User can configure the IP settings, Subnet Mask, Gateway as below: IP address: Manually assign the IP address that the network is using. The default IP is 192.168.2.1 Subnet Mask: Assign the subnet mask to the IP address. -
Page 15: Load Default Setting
ES1625-31 4.4 Load Default Setting Clicking the Load button will make the switch being set to the original configuration. ※ Note: It exclude to change user name, password and IP configuration. If you want to restore default setting including IP and user name password, then you can press the reset button for hardware base reset. -
Page 16: Reboot Device
ES1625-31 After pressing Update button, the old web code will be erased. Then you can select the image file and press “update” button to update the firmware you need. 4.6 Reboot Device Click Confirm button to reboot the device. ※Note: The reboot is for software base instead of hardware base. -
Page 17: Port Management
ES1625-31 Chapter 5. Port Management Port Management includes Port Configuration, Port Mirroring, Bandwidth Control, Broadcast Storm Control and PoE. 5.1 Port Configuration In Port Configuration, you can set and view the operation mode for each port. Auto-Negotiation: Enable and Disable. Being set as ‘Enable’, the Speed, Duplex mode, Pause, Backpressure, TX Capability and Address Learning are negotiated automatically. -
Page 18: Port Mirroring
ES1625-31 Current Status: Displays current port status. Setting Status: Displays current status. Click Update to make the configuration effective. 5.2 Port Mirroring The Port mirroring is a method for monitoring traffic in switched networks. That Traffic through ports can be monitored by any of the ports means traffic goes in or out monitored (source) ports will be duplicated into mirroring (destination) port. -
Page 19: Broadcast Storm Control
ES1625-31 5.4 Broadcast Storm Control The switch implements a broadcast storm control mechanism. Tick the check boxes to have them beginning to drop incoming broadcast packets if the received broadcast packet counts reach the threshold defined. Each port’s broadcast storm protection function can be enabled individually by ticking the check boxes. -
Page 20: Poe
ES1625-31 5.5 PoE User could know per PoE port out power status in this page and also enable or disable per port. -
Page 21: Vlan Setting
ES1625-31 Chapter 6. VLAN Setting A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain, which would allow you to isolate network traffic, so only the members of the same VLAN will receive traffic from the ones of the same VLAN. Basically, creating a VLAN from a switch is logically equivalent of reconnecting a group of network devices to another Layer 2 switch. -
Page 22: Vlan Member
ES1625-31 setting for your Up- and Downlink Ports in your VLAN Tagged Network. Don’t care means the outgoing packet of the selected port keep the original packet received at the source port. This is the default setting when starting VLAN configuration. You should change to either Add or Remove Tag. - Page 23 ES1625-31 There firstly add your VLAN Groups (identified throughout your network by unique and constant numbers). Start with IDs from 100 and up. Keep in mind that some switches use “1” as the default, while others use “4095” or “4096” as default. Starting with 100 gives you enough free room and less compatibility issues.
-
Page 24: Multi To 1 Setting
ES1625-31 6.3 Multi to 1 Setting Multi to 1 VLAN is used in CPE side of Ethernet-to-the-Home and is exclusive to VLAN setting on VLAN Member Setting. When VLAN member Setting is updated, multi to 1 setting will be void and vice versa. -
Page 25: Per Port Counter
ES1625-31 Chapter 7. Per Port Counter 7.1 Port Counter This page provides port counter of each port. There are 4 categories: Receive Packet & Transmit Packet/ Transmit & Collision / Receive Packet & Drop /Receive & CRC error. Once you change the counter category, the counter will be cleared automatically. -
Page 26: Qos Setting
ES1625-31 7.2 QoS Setting Here you can configure QoS policy priority mode and CoS (Class of Service) configuration. QoS (Quality of Service) refers to mechanisms in the network software that make the actual determination of which packets have priority. CoS refers to feature sets, or groups of services, that are assigned to users based on company policy. -
Page 27: Port, 802.1P, Ip/Ds Based
ES1625-31 7.4 Port, 802.1p, IP/DS based TCP/UDP Port Based... -
Page 28: Security
ES1625-31 Chapter 8. Security 8.1 MAC Address Binding Port No: Displays the port number being assigned the MAC addresses. MAC Address: Users can assign up to 3 MAC addresses to the port. Read: Pull down the selection bar to choose a port number and click the read button to show the MAC addresses bound with the port or modify the MAC addresses. -
Page 29: Spanning Tree
ES1625-31 Chapter 9. Spanning Tree 9.1 STP Bridge Settings Bridge Priority: This parameter configures the spanning tree priority globally for this switch. The device with the highest priority becomes the STP root device. However, if all devices have the same priority, the device with the lowest MAC address will then become the root device. -
Page 30: Stp Port Settings
ES1625-31 9.2 STP Port Settings Port No: The port ID. It cannot be changed. Aggregations mean any configured trunk group. Root Path Cost: This parameter is used by the STP to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster media, and higher values assigned to ports with slower media. -
Page 31: Loopback Detection Settings
ES1625-31 9.3 Loopback Detection Settings... -
Page 32: Trunking
ES1625-31 Chapter 10. Trunking Port trunk allows multiple links to be bundled together and act as a single physical link for increased throughput. It provides load balancing, and redundancy of links in a switched inter-network. Actually, the link does not have an inherent total bandwidth equal to the sum of its component physical links. -
Page 33: Backup /Recovery
ES1625-31 Chapter 11. Backup /Recovery This function provides the user with a method to backup/recovery the switch configuration. The user can save configuration file to a specified file. If the user wants to recover the original configuration, which is saved at the specified path, just enter the password and then press the... -
Page 34: Miscellaneous
ES1625-31 Chapter 12. Miscellaneous Miscellaneous setting is used to configure output queue aging time, VLAN stride and IGMP snooping. Output queue aging: This function is used to avoid the poor utilization of the switch. When a packet is stored in a switch for a long time, it will expire from the allowable time defined by the protocol and become a useless packet. -
Page 35: Logout
ES1625-31 Chapter 13. Logout The administrator has write access for all parameters governing the onboard agent. User should therefore assign a new administrator password as soon as possible, and store it in a safe place. When you forgot your IP or password, please use the reset button for the factory... -
Page 36: Specification
ES1625-31 Chapter 14. Specification Model Name ES1325-31 Standards Ethernet: IEEE 802.3 10BaseT, IEEE 802.3u 100BaseTX, IEEE 802.ab 1000BaseT, IEEE 802.3z 1000BaseSX/LX IEEE 802.3x Flow Control IEEE 802.3ad Link Aggregation Control Protocol IEEE 802.1Q VLAN IEEE 802.1p Class of Service IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol... - Page 37 ES1625-31 Management: Web Management, password protected access, Configuration backup/restore, TFTP firmware upgrade Filtering/Forwarding Rates 1000Mbps port – 1,488,000pps 100Mbps port - 148,800pps, 10Mbps port - 14,880pps Transmission Media 10/100BaseTX Cat. 5 UTP/STP 1000BaseT Cat. 5 / Cat. 5E UTP/STP LED Indicators...
- Page 38 TEL: +91 22 6128 8700 FAX: +91 22 6128 8705 www.everfocus.in sales@everfocus.in Ihr EverFocus Produkt wurde entwickelt Your EverFocus product is designed and und hergestellt mit qualitativ manufactured with high quality materials hochwertigen Materialien und and components which can be recycled Komponenten, die recycelt und wieder and reused.