Avaya 4600 Series Administrator's Manual page 57

When specifying IP Addresses for the file server or media server, use either dotted decimal
format ("xxx.xxx.xxx.xxx") or DNS names. If you use DNS, note that the system value DOMAIN
is appended to the IP Addresses you specify. If DOMAIN is null, the DNS names must be fully
qualified, in accordance with IETF RFCs 1034 and 1035. For more specific information about
DNS, see DHCP Generic Setup
Table 3: Required Network Information Before Installation - Per DHCP Server
1. Gateway (router) IP Address(es)
2. TFTP server IP Address(es)
3. Subnet mask
4. Avaya Media Server
Gatekeeper IP Address(es)
5. Avaya Media Server Gatekeep
er port
6. TFTP server file path
7. Telephone IP Address range
From:
To:
8. DNS server address(es)
9. HTTP server address(es)
10. HTTPS/TLS server
address(es)
The file server file path is the "root" directory the server uses for all transfers. This is the default
directory all files will be uploaded to or downloaded from. In configurations where the upgrade
script and application files are in the default directory, do not use item
Network Information Before Installation - Per DHCP Server
on page 59 and DNS Addressing
H.323 only, if applicable.
H.323 only.
H.323 only. Although this can be a value
between 0 and 65535, the default value is
1719. Do not change the default value unless
that value conflicts with an existing port
assignment.
H.323 only, if applicable.
If applicable.
If applicable.
If applicable.
Required Network Information
on page 107.
6 in Table 3: Required
on page 57.
Issue 5 November 2006 57