Additional Hardware Requirements - Avaya 4600 Series Administrator's Manual

Additional Hardware Requirements

Ensure that the appropriate circuit pack(s) are administered on your media server. See the
●
media server's hardware guide for more detail.
!
Important:
IP telephone firmware Release 2.3 or greater requires TN799C V3 or greater
Important:
Control-LAN (C-LAN) circuit pack(s). For more information, see the
Communication Manager Software and Firmware Compatibility Matrix on the
Avaya support Web site
http://www.avaya.com/support.
A Category 5e LAN. If the telephones are to be powered from the LAN, the power supply
●
must be designed to the IEEE 802.3af-2003 standard for LAN powering.
Electrical power provided to each telephone by one of the following two sources:
●
- A Telephone Power Module, also called the DC power jack. You must order this module
separately, except for the 4630 and the 4690 phones. The 4630 comes with its own
power brick and the 4690 has its own power interface module. The 4630SW does not
come with a power brick. For the 4630SW, you must order the power brick separately if
LAN powering will not be used for that particular telephone model.
- IEEE 802.3af-2003, if the LAN supports this powering scheme. Note that the 4630 and
4690 cannot be powered this way, but the 4630SW can be powered this way.
Verify that the 4600 Series IP Telephone package includes the following components:
●
- 1 telephone set.
- 1 telephone handset. Note that the 4622SW and the 4690 telephones do not come with
handsets.
- 1 H4DU 4-conductor coiled handset cord that is 9 feet long when extended, plugged into
the telephone and the handset. The handset cord for the 4601 and 4601+ is 6 feet long.
Not applicable for the 4622SW and 4690 IP Conference Telephones.
- 1 Category 5 modular line cord for the connection from the IP telephone to the Ethernet
wall jack.
- 4600 Series IP Telephone Safety Instructions (555-233-779).
- Power Interface Module for the 4690 IP Conference Telephone only.
- Power Brick for 4630 IP Telephones only.
- Stylus for 4630/4630SW IP Telephones only.
You might need a Category 5e modular line cord for the connection from the 4600 Series
●
IP Telephone to the PC.
Note:
See the 4600 Series IP Telephone Installation Guide.
Note:
Hardware Requirements
Issue 5 November 2006 49