Avaya 4600 Series Administrator's Manual page 147

Table 18: Possible Error Messages During 4601 IP Telephone Installation or
Operation (continued)
Error Message 4601 Visual Indication/Cause/Resolution
VISUAL INDICATION: Message Waiting indicators at top of telephone and
System busy
left middle of faceplate display a broken flutter continuously (alternating 50
milliseconds on, 50 milliseconds off for 500 milliseconds followed by 500
milliseconds off) until either the "*" or "#" button is pressed.
CAUSE: Most likely, the number of IP endpoints on the PBX is already at
maximum, Less likely, network resource is unavailable.
RESOLUTION: The telephone was attempting to access the PBX and was
not successful. Check the resource being called upon for availability. If the
resource appears operational and properly linked to the network, verify
addressing is accurate and that a two-way telephone/resource
communication path exists. Press * to retry the process with the same
values, or # to restart and enter the extension and password again.
VISUAL INDICATION: Message Waiting indicators at top of telephone and
System Error
left middle of faceplate display a broken flutter continuously (alternating 50
milliseconds on, 50 milliseconds off for 500 milliseconds followed by 500
milliseconds off) until either the "*" or "#" button is pressed.
CAUSE: The PBX has an unspecified problem.
RESOLUTION: Press * to retry the process using the same values
or # to restart and re-enter the extension and password. Consult your Avaya
Media Server administration and troubleshooting documentation.
VISUAL INDICATION: Message Waiting indicators at top of telephone and
Undefined
left middle of faceplate display a broken flutter continuously (alternating 50
Error
milliseconds on, 50 milliseconds off for 500 milliseconds followed by 500
milliseconds off) until either the "*" or "#" button is pressed.
CAUSE: The PBX has rejected registration for an unspecified reason.
RESOLUTION: Press * to retry the process using the same values or # to
restart and re-enter the extension and password. Consult your Avaya Media
Server administration and troubleshooting documentation.
VISUAL INDICATION: Message Waiting indicators at top of telephone and
Wrong Set
left middle of faceplate display a broken flutter continuously (alternating 50
Type
milliseconds on, 50 milliseconds off for 500 milliseconds followed by 500
milliseconds off) until either the "*" or "#" button is pressed.
CAUSE: The PBX does not recognize the set type.
RESOLUTION: Ensure the PBX is properly administered to expect the
appropriate telephone for the IP Address and extension. Press * to retry the
process using the same values or # to restart and re-enter the extension
and password.
Troubleshooting the 4601 IP Telephone
Issue 5 November 2006
3 of 3
147