Customizing The Site-Specific Option Number (Sson); Entering Options Using The Telephone Dialpad; Enhanced Local Dialing - Avaya 4600 Series Administrator's Manual

Server Administration

Customizing the Site-Specific Option Number (SSON)

DHCP Generic Setup
system parameter listed in
a comma followed by name=value
where name is a parameter name and value is its associated value. Invalid values cause the
data to be ignored for that name. Customizing the SSON affects all telephones associated with
that DHCP server.

Entering Options Using the Telephone Dialpad

Local administrative procedures of note to LAN Administrators might be:
QoS Option Setting - to customize any or all of the QoS parameters locally.
●
Secondary Ethernet (Hub) Interface Enable/Disable - to enable or disable the secondary
●
Ethernet hub locally.
Reset - to return all system initialization values to the application software default values,
●
see The Reset Administrative Option
View - to view the 4600 IP Telephone system parameters, see
●
Option on page 135.
Clear - to remove all administered values, user-specified data, and option settings, etc,
●
see The Clear Administrative Option
Restart -to restart a particular telephone, see
●
Chapter 3 of the 4600 Series IP Telephone Installation Guide details how to use all local
administrative options.

Enhanced Local Dialing

The 4610SW, 4620/4620SW, 4621SW, 4622SW, 4625SW, and 4630/4630SW have a variety of
telephony-related applications (e.g., Speed Dial, Call Log, Web Browser, etc.). These
applications might obtain a telephone number during operation. For example, the Call Log
saves an incoming caller's number, while the Web browser might obtain a dialable link from a
corporate Web site. Before Release 1.8 software, when the user indicated a desire to call one of
these incoming numbers, the 4610SW/4620/4620SW/4630/4630SW would first require the user
to edit the number, generally by prepending digits to account for dial access codes, country
codes if applicable, etc.
108 4600 Series IP Telephone LAN Administrator Guide
on page 59, discusses that the SSON can be set to a string. For each
Table 10 that you want to include, append the SSON string with:
on page 132.
on page 130.
The View Administration
Restart the Telephone on page 134.