Avaya 4600 Series Administrator's Manual page 100

Server Administration
Table 10: 4600 Series IP Telephone Customizable System Parameters (continued)
Parameter Name
ENHDIALSTAT
FTPSRVR
FTPDIR
FTPUSERSTAT
GMTOFFSET
HEADSYS
100 4600 Series IP Telephone LAN Administrator Guide
Default Value
1
" " (Null)
" " (Null)
1
0:00
1
Description and Value Range
Enhanced Dialing Status. If set to "1" the
Local Dialing feature is turned on for all associated
applications. If set to "0" the feature is turned off.
IP Address of the FTP server on which an FTP backup/
restore file is stored. Format is dotted decimal or DNS
name with from 0-255 ASCII characters, spaces not
allowed. Not applicable to 4601 or 4602 IP Telephones.
FTP server directory path on which an FTP backup/
restore file is stored. Format is dotted decimal or DNS
name with from 0-255 ASCII characters, with spaces
allowed.
Administered user permissions for FTP backup/restore
files. Controls whether the user may specify an FTP
server IP Address and/or directory path for backing up
and restoring user data. Valid values are:
1=User can specify server and directory path.
2=User can specify directory path only.
0=User must use the server and directory path
administered.
If the telephone is supposed to restore/retrieve data with
HTTP/HTTPS as indicated by the system value of
BRURI, the system value of RESTORESTAT (and not
FTPUSERSTAT) is the only relevant permission to
backup/restore. This is because HTTP/HTTPS is
invoked when BRURI is non-null, and if the operation
fails, FTP is not attempted.
Standard Time Offset from Greenwich Mean Time for
SIP telephones. Valid values are a positive or negative
number of hours and minutes less than 13 hours (1 to 6
ASCII characters, optionally beginning with "+" or "-",
followed by one or two ASCII numeric digits whose
combined value is from 0 to 12, optionally followed by a
":" and two ASCII numeric digits whose combined value
is from 00 to 59).
Headset operational mode. One ASCII numeric digit.
Valid values are:
0 or 2 - General Operation, where a disconnect
messages returns the telephone to an idle state.
1 or 3 - Call Center Operation, where a disconnect
message does not change the state of the telephone.
Enhanced
5 of 12