Setting The Date And Time On Sip Ip Telephones; Setting The Dial Plan On Sip Ip Telephones - Avaya 4600 Series Administrator's Manual

Server Administration
Note:
The Enhanced Local Dialing algorithm requires that telephone numbers be
Note:
presented in a standard format. The standard format depends on how you
administer the parameters indicated in
that international telephone numbers are identified as such in, for example, WML
Web sites. This is indicated by preceding that type of number with a plus (+) sign,
and a space or some non-digit character following the country code.

Setting the Date and Time on SIP IP Telephones

SIP IP telephones need a source of date and time information. This typically comes from a
network time server running the Simple Network Time Protocol (SNTP). The telephones use
several administrative parameters for this functionality. The parameter SNTPSRVR defines the
server's IP Address(es). GMTOFFSET defines the offset from Greenwich Mean Time (GMT).
DSTSTART and DSTSTOP define the start and end of Daylight Savings Time, respectively.
DSTOFFSET defines the Daylight Savings Time offset from Standard Time. Finally,
DATETIMEFORMAT defines the format of the date and time display. See
definitions and valid values for SIP Date and Time parameters.

Setting the Dial Plan on SIP IP Telephones

A dial plan is used during manual dialing to allow a call to be initiated without using a Send
button and without waiting for the expiration of a timeout interval. The dial plan consists of one
or more format strings separated by the logical OR symbol ( I ). When the dialed digits match a
format string in the dial plan, the call is initiated. The DIALPLAN parameter defines the dial plan.
Valid characters in a format string, and their meanings, are as follows:
digits 0 through 9, inclusive = Specific dialpad digits
* = the dialpad character *
# = the dialpad character # (but only if it is the first character in the dialed string – see below)
x = any dialpad digit (i.e., 0-9)
Z or z = present dial tone to the user (for example, for Feature Access Code (FAC) entry)
[ ] = any one character within the brackets is a valid match for a dial plan string
- = any one digit between the bounds within the brackets, inclusive, is a match
+ = the character preceding the + can repeat 0 or more additional times, for a valid match
Dial plan example:
"[2-4]xxx|[68]xxx|*xx|9Z1xxxxxxxxxx|9z011x+"
110 4600 Series IP Telephone LAN Administrator Guide
Table 12. The algorithm also assumes
Table 10 for