Powerware Hot Sync Can Bridge Card - Powerware 9155 User Manual

INSTALLING OPTIONS

Powerware Hot Sync CAN Bridge Card

The Powerware Hot Sync CAN Bridge Card, shown in Figure 16, can be
installed to provide connectivity for operational mode control and
metering of a parallel system at any UPS in the system.
To install the Powerware Hot Sync CAN Bridge Card:
1.
24
EATON Powerware
Figure 16. Powerware Hot Sync CAN Bridge Card
Remove the front covers of all cabinets, starting with the top
cabinet.
Press and release the handle latch at the bottom of each cover and
then lift the cover up and off the cabinet (see Figure 17).
Figure 17. Removing the Front Covers
®
9155 Parallel UPS (8–15 kVA) User's Guide
Plug-in Terminal Block
S
164201592 Rev C www.powerware.com