Unloading The Cabinet(S) - Powerware 9155 User Manual

Parallel ups 8-15 kva

Hide thumbs Also See for 9155:

Table of Contents

Unloading the Cabinet(s)

The following tools are required for unloading the cabinet(s):

The UPS and

requires at least two people to safely remove the cabinets from the pallet.

To remove the UPS or EBM from the shipping pallet:

NOTE Be sure to retain the stabilizing bracket and hardware for later re-assembly onto the

cabinet.

EATON Powerware

9155 Parallel UPS (8–15 kVA) User's Guide

15 mm wrench or socket

7 mm nutdriver or socket

Extended Battery Module

Remove the two M10 bolts securing the stabilizing bracket to the

pallet (see Figure 2).

Figure 2. Removing the Stabilizing Bracket Bolts

Remove the four M4 screws securing the stabilizing bracket to the

cabinet rear panel and remove the bracket (see Figure 3). Retain the

hardware for later use.

C A U T I O N

(EBM) are heavy (see page 8). Unloading the cabinets

M10 Bolts

164201592 Rev C www.powerware.com

UPS SETUP

Table of Contents