Powerware 9155 User Manual page 54

Parallel ups 8-15 kva

Hide thumbs Also See for 9155:

Table of Contents

OPERATION

17. Select the System On option; press the

18. Confirm the selection. Press and hold the

19. Press the

20. Auto-calibrate the load (with 10% minimum load recommended):

21. After calibration completes (in less than a minute), verify the load

22. Press the

EATON Powerware

seconds, until the UPS stops beeping.

The UPS goes to Bypass mode for five seconds, and then the

indicator illuminates. Each UPS should be in Normal mode.

ESC

button until the Eaton Powerware logo appears.

Using the

button, scroll to the Settings menu and then press

the

button twice to select the User Settings menu.

Using the button, scroll to the Parallel Operation Settings

option and press the

Using the button, scroll to the Start Auto Calibration option and

press the

button to select the option. Press and hold the

button for a second to begin the process.

sharing through the front panel:

Using the button, scroll to the Measurements menu and press

the

button twice to select the Parallel System menu.

Select and view the voltage meter options.

ESC

button until the Eaton Powerware logo appears.

9155 Parallel UPS (8–15 kVA) User's Guide

button.

button for three

button.

164201592 Rev C www.powerware.com

Table of Contents