Changing The Language; Display Functions - Powerware 9155 User Manual

OPERATION
The following table shows the indicator status and description.
Indicator Status
On
Green Flashing
Off
On
Yellow
On
Yellow
On
Flashing
Red

Changing the Language

Press and hold the first button on the left for approximately five seconds
to select the language menu. This action is possible from any LCD menu
screen.

Display Functions

As the default or after 15 minutes of inactivity, the LCD displays the
selectable startup screen. The default is the Eaton Powerware logo and
can be changed to the Mimic screen in the User Settings menu.
The backlit LCD automatically dims after a long period of inactivity. Press
any button to restore the screen.
Use the two middle buttons ( and ) to scroll through the menu
structure. Press the
to select an option. Press the
previous menu.
40
EATON Powerware
Description
The UPS is operating normally.
S The UPS is starting up or is shut down and waiting for power to return.
S A new information message is active.
S Bypass is not available.
The UPS is turned off and will not turn on automatically.
The UPS is in Battery mode.
The UPS is in Bypass mode.
The UPS has an active alarm.
There is a new UPS alarm condition. See "Troubleshooting" on page 55 for
additional information.
button to enter a submenu. Press the
®
9155 Parallel UPS (8–15 kVA) User's Guide
ESC
button to cancel or return to the
S
164201592 Rev C www.powerware.com
button