Programming Console Operations; Overview - Omron SRM1(-V2) Operation Manual

Programming Console Operations

MONITOR
RUN PROGRAM
Mode display
<PROGRAM>
Operation
PROGRAM Mode
MONITOR Mode
RUN Mode
! Caution
4-2

Programming Console Operations

4-2-1 Overview

Name
Clearing memory
Reading/clearing error
messages
Buzzer operation
Reading UM area
information
Setting an expansion
instruction
Setting a program
memory address
36
• The SRM1 will enter RUN mode automatically if a Peripheral Device such as a
Programming Console isn't connected when the SRM1 is turned on (when
DM 6600 is #0000).
RUN
BZ <MONITOR>
CLR
00000
Initial display
The SRM1 program isn't executed in PROGRAM mode. Use PROGRAM mode
to create and edit the program, clear memory, or check the program for errors.
The SRM1 program is executed in MONITOR mode and I/O is processed just as
it is in RUN mode. Use MONITOR mode when testing the system by monitoring
the SRM1's operating status, force-setting and resetting I/O bits, changing the
SV/PV of timers and counters, etc.
This is the SRM1's normal operating mode. The SRM1's operating status can be
monitored from a Peripheral Device, but bits can't be force-set/force-reset and
the SV/PV of timers and counters can't be changed.
Be sure to check the system thoroughly before executing the SRM1 program to
prevent any accidents that might occur when the program is first started.
The following table lists the programming and monitoring operations that can be
performed from a Programming Console. Refer to the rest of this section for de-
tails on operational procedures.
Clears all or part of the Program Memory and any data areas that are not read-only, as well
as the contents of the Programming Console's memory.
Displays and clears error messages and displays MESSAGE instruction messages.
Turns on and off the buzzer that sounds when Programming Console keys are pressed.
Reads the state of area setting and capacity in the user memory.
Reads and sets the function code assignment of an expansion instruction.
Sets the specified program memory address when reading, writing, inserting and deleting
programs.
MONITOR
PROGRAM
BZ
Operation
Function
Section
MONITOR
RUN PROGRAM
<RUN>
SHIFT CLR
4-2
BZ